I’ve got a gripe with Doctor Strange 2 (in The Multiverse of Madness).

I’ve got a gripe with Doctor Strange 2…

Sure, it seems like a minor thing and to casual viewers I’m sure they would never even notice. Out of my party of four I’m the only one who even understood the reference, nevermind what was lost as a result.

It’s almost a throw-away line in a movie chock full of them:
“Designated universe 616”

Again, I’m sure that out of everyone who shuffled out to catch this movie on opening night I’m in the VERY small minority of people who would get their panties in a twist over this. But it’s wrong. 100% this is an egregious error in continuity. One with implications that destroys 1 of 2 universes, one of which I care VERY deeply about… The mainline Marvel Comics Universe.

If you aren’t aware, Earth-616 is the designation given to the mainline marvel comics universe. A universe where the x-men were founded in the 60s and their contemporary FF were out galivanting through cosmic rays during the same time period… The MCU, with all it’s pros and cons compared to the comics, is Earth-199999. Canonically. Confirmed. It’s printed in a book from 2008 published by Marvel Comics themselves: “Official Handbook of the Marvel Universe A to Z – Volume 5”.

Why. WHY would they reuse the 616 moniker? Who does that benefit? Casual viewers or fans don’t give a crap what specific universe it is. Yet as a fan of the Comics continuity, I’m incited by the suggestion. Is this a change made for MCU diehards? How does it benefit them to have the two universes share a designation?

As mentioned, I’m much more a fan of the original comics universe and I’ve always felt the idea that we are seeing an alternate universe (199999) explained the differences between the screen and the page.. An excuse I can no longer turn to. When the MCU was effectively an issue of what-if in my mind, seeing a lack of mutants or the FF not show up at the battle against Thanos on earth made sense. They don’t exist in this timeline. But in the 616 timeline, they DO. They WOULD.

The implication here is that the timelines/continuities have been muddied.. Or worse, will be merged. Why not just say 606, or some other number that hasn’t been claimed in an issue of what-if or an animated series somewhere?

For clarification, yes, I know Mysterio dropped the same bomb on us in Far From Home, but he was full of shit and not an actual multiversal traveler with any real knowledge..

Anyways, just a pointless rant into the void of google. Maybe some disney exec will catch wind of this sentiment overall while sipping their LA latte reviewing the responses to Multiverse of Madness and they can correct the issue when FF drops…

Cyborg Augmentations v0.6

Ok guys, submission time… I’ve got the electronics working basically how I want them for v1.0. Still some bugs I’m working on squashing on both sides of the code (the client/arduino IDE side and the Python server side code).

I also need to get my hands on some other resin so I can’t print it in a less ridiculous color… Although for a #hallowearables competition, the SiriyaTech “Creamy” resin is somewhat… Kinda… A little bit orange?? I’ll take it.

With all of that said, at the end of the day I’m out of time… Literally. I’m headed to New York Comic Con tomorrow and won’t have any more time to polish this bad boy up before the official cut-off date (10/09/21). So, taking a page out of the Voidstar playbook, the project will have to stand as is! Cut dreams/features and just send it!

Just as a recap for myself, here’s a breakdown of what I learned during this process:

  • Rudimentary 3D modeling in Blender.
  • A ton of Arduino programming I hadn’t touched before..
    • Wifi.
    • RTC.
    • The Rotary Encoder.
    • Creating a menu system.
  • I Created a twitter application with their API, to allow the python to tweet..
  • Some python CSV file handling stuff.
  • Some python OS file handling stuff.

Anyways, below is a short video of the device working along with the code needed to get this beast running, and the bill of materials (below $200 was key..). Wish me luck in the contest!

Bill of Materials:

Part NameCostTotalVendor
Arduino MKR1000$34$34Amazon
UCTRONICS 0.96 OLED$7$41Amazon
Adafruit 328 LIPO$18$59Amazon
Velcro Straps$5$64Amazon
WayinTop Rotary Encoder (5-pack)$11$75Amazon
Aimos USB Volume Controller (Rotary Knob)$26$101Amazon

Arduino Code:

//Include necessary libraries:
#include <Wire.h>
#include <Adafruit_SSD1306.h>
#include <ArduinoHttpClient.h>
#include <WiFi101.h>
#include <WiFiUdp.h>
#include <RTCZero.h>
#include "arduino_secrets.h"

//Needed for on-board RTC:
RTCZero rtc;

//Enter your username, pass, and writable server address in tab/arduino_secrets.h, used here:
char ssid[] = SECRET_SSID;
char pass[] = SECRET_PASS;
char serverAddress[] = SECRET_SERVER;  // server address
int port = 80;
WiFiClient wifi;
HttpClient client = HttpClient(wifi, serverAddress, port);
int status = WL_IDLE_STATUS;

//Needed for the OLED:
#define OLED_RESET 4
Adafruit_SSD1306 display(OLED_RESET);

//Constants and variables:
#define SW 0 //Encoder Switch/Press Pin
#define DT 1 //Encoder rotation pin 1
#define CLK 2 //Encoder rotation pin 2
int maxOptions; //How many options the current menu uses. 
int uploading; // State of menu when uploading.
int counter = 1; //Which entry the menu starts on at boot.
int currentStateCLK; //Current reading from encoder.
int lastStateCLK; //Previous reading from encoder.
String entryName; //Name of current Menu option.
String entryClass; //Type of current Menu option.
String currentDir; //Direction the encoder is turning, Clockwise (CW) or Counter-Clockwise (CCW).
int hours; //Integer storage of current hours, so we can math them until correct.
int offset = -4; // Enter your offset from GMT here..
String curHours; // Storage of the current hours in string form for easy output to serial, display, and upload to CSV.
String curMinutes; // Storage of the current minutes in string form for easy output to serial, display, and upload to CSV.
String curSeconds; // Storage of the current seconds in string form for easy output to serial, display, and upload to CSV.
String curTime; // Storage of the full time string.
String ToD; //String of am or pm.. Based on hours/current time.
String screenStatus = "boot"; //Current state of the screen/menu system.
int bootStage = 1; //Stage of the boot process.
unsigned long lastButtonPress = 0; //Tracker to help avoid registering double presses of the encoder button.

void setup() {

  //Setup Debug Light, turn it on at boot and then off after void setup completes to let us know the system is ready...
  pinMode(LED_BUILTIN, OUTPUT);
  digitalWrite(LED_BUILTIN, HIGH);

  //Start the serial monitor:
  Serial.begin(9600);

  //Start the Display:
  display.begin(SSD1306_SWITCHCAPVCC, 0x3C);
  screen();

  //Needed for encoder:
  // Set encoder pins as inputs
  pinMode(CLK, INPUT);
  pinMode(DT, INPUT);
  pinMode(SW, INPUT_PULLUP);
  // Read the initial state of CLK signal:
  lastStateCLK = digitalRead(CLK);

  //Call our Wifi connection function:
  wifiConnect();
  
  //Setup RTC capabilities:
  rtc.begin();
  bootStage = 3;
  screen();
  delay(4000);
  unsigned long epoch;
  int numberOfTries = 0, maxTries = 20;

  //Pull the epoch time via NTP:
  do {
    epoch = WiFi.getTime();
    numberOfTries++;
  }

  while ((epoch == 0) && (numberOfTries < maxTries));
  if (numberOfTries == maxTries) {
    Serial.print("NTP unreachable!!");
    while (1);
  }

  else {
    Serial.print("Epoch received: ");
    Serial.println(epoch);
    rtc.setEpoch(epoch);
    Serial.println();
    bootStage = 4;
    screen();
    delay(2500);
  }

  //Move to the running state:
  screenStatus = "running";
  digitalWrite(LED_BUILTIN, LOW);
  genTime();
  screen();
}

void wifiConnect() {
  // Connect to WPA/WPA2 network:
  while ( status != WL_CONNECTED) {
    Serial.print("Attempting to connect to Network named: ");
    Serial.println(ssid);                   // print the network name (SSID);
    status = WiFi.begin(ssid, pass);
    bootStage = 2;
    screen();
    // wait 8 seconds for connection:
    delay(8000);
  }
}

void loop() {
  //Call our function to monitor the rotation and button of the rotary encoder:
  monitorEncoder();
  //Call our function to generate and format the time:
  genTime();
  //Call our function to draw and refresh the screen:
  screen();
  //**********DEBUG LINE*****************// Serial.println(btnState + screenStatus);
}
void monitorEncoder(){
    // Monitor the current state of encoder, for rotation:
  currentStateCLK = digitalRead(CLK);
  if (currentStateCLK != lastStateCLK  && currentStateCLK == 1) {
    // If the DT state is different than the CLK state then
    // the encoder is rotating CCW so decrement
    if (digitalRead(DT) != currentStateCLK) {
      counter --;
      currentDir = "CCW";
    } else {
      // Encoder is rotating CW so increment
      counter ++;
      currentDir = "CW";
    }
    if (counter > maxOptions) {
      counter = 1;
    }
    if (counter < 1) {
      counter = maxOptions;
    }
    //Display any rotation events on the serial monitor for debugging:
    Serial.print("Direction: ");
    Serial.print(currentDir);
    Serial.print(" | Counter: ");
    Serial.println(counter);
    Serial.println(screenStatus);
  }

  // Remember last CLK state
  lastStateCLK = currentStateCLK;

  // Read the button state:
  int btnState = digitalRead(SW);
  if ((btnState == LOW) and (entryName == "Back")) {
      if (millis() - lastButtonPress > 500) {
        Serial.println("Button pressed!");
        screenStatus = "running";
        counter = 1;
        lastButtonPress = millis();
      }
  }
  else if ((btnState == LOW) and ((screenStatus == "Food") or (screenStatus == "Activity"))) {
    if (millis() - lastButtonPress > 500) {
      Serial.println("Button pressed!");
      screenStatus = "uploading";
      upload();
      lastButtonPress = millis();
    }
  }
  else if ((btnState == LOW) and (screenStatus == "running")) {
      if (millis() - lastButtonPress > 500) {
        Serial.println("Button pressed!");
        screenStatus = entryName;
        maxOptions = 2;
        lastButtonPress = millis();
      }
  }
}
void screen() {
  if (screenStatus == "boot") {
    display.clearDisplay();
    if (bootStage == 1) {
      entryName = "Booting...";
      display.setTextColor(WHITE);
      display.setTextSize(2);
      display.setCursor(0, 10);
      display.println (entryName);
    }
    display.setTextSize(1);
    display.setCursor(0, 0);
    if (bootStage == 2) {
      display.print("WiFi..");
    }
    else if (bootStage == 3) {
      display.print("WiFi..RTC..");
    }
    else if (bootStage == 4) {
      display.print("WiFi..RTC..Done!");
    }
    display.display();
  }
  if (screenStatus == "running") {
    display.clearDisplay();
    maxOptions = 2;
    if (counter == 1) {
      entryName = "Food";
    }
    else if (counter == 2) {
      entryName = "Activity";
    }
    //Display the time:
    display.setTextSize(1);
    display.setCursor(0, 0);
    display.setTextColor(WHITE);
    display.println(curTime);
  }
  else if (screenStatus == "Food") {
    entryClass = "Food";
    display.clearDisplay();
    maxOptions = 10;
    if (counter == 1) {
      entryName = "Coffee";
    }
    else if (counter == 2) {
      entryName = "Coke";
    }
    else if (counter == 3) {
      entryName = "IPA";
    }
    else if (counter == 4) {
      entryName = "Meal";
    }
    else if (counter == 5) {
      entryName = "Milk";
    }
    else if (counter == 6) {
      entryName = "Pizza";
    }
    else if (counter == 7) {
      entryName = "Rootbeer";
    }
    else if (counter == 8) {
      entryName = "Snack";
    }
    else if (counter == 9) {
      entryName = "Water";
    }
    else if (counter == maxOptions) {
      entryName = "Back";
    }
    //Display the time:
    display.setTextSize(1);
    display.setCursor(0, 0);
    display.setTextColor(WHITE);
    display.println(curTime);
  }
  else if (screenStatus == "Activity") {
    entryClass = "Activity";
    display.clearDisplay();
    maxOptions = 9;
    if (counter == 1) {
      entryName = "Fell Asleep";
    }
    else if (counter == 2) {
      entryName = "Blogged";
    }
    else if (counter == 3) {
      entryName = "Dumped";
    }
    else if (counter == 4) {
      entryName = "Read";
    }
    else if (counter == 5) {
      entryName = "Streamed";
    }
    else if (counter == 6) {
      entryName = "Vitamins";
    }
    else if (counter == 7) {
      entryName = "Woke Up";
    }
    else if (counter == 8) {
      entryName = "Whizzed";
    }
    else if (counter == maxOptions) {
      entryName = "Back";
    }
    //Display the time:
    display.setTextSize(1);
    display.setCursor(0, 0);
    display.setTextColor(WHITE);
    display.println(curTime);
  }
  else if (screenStatus == "uploading") {
    display.clearDisplay();
    if (uploading == 1) {
      entryName = "UPLOADING.";
    }
    else if (uploading == 2) {
      entryName = "UPLOADED!";
    }
    else if (uploading == 3) {
      entryName = "Failed..";
    }
  }

  //display the main text:
  display.setTextColor(WHITE);
  display.setTextSize(2);
  display.setCursor(0, 10);
  display.println (entryName);
  display.display();

}

//Function to generate a human friendly time string:
void genTime() {
  hours = (int(rtc.getHours()));
  Serial.println(hours);
  hours = hours + offset;
  if (hours < 1) {
    hours = hours + 12;
    ToD = "pm";
  }
  else if (hours > 12) {
    hours = hours - 12;
    ToD = "pm";
  }
  else {
    ToD = "am";
  }
  curHours = String(hours);
  if (int(rtc.getMinutes() < 10)) {
    curMinutes = ("0" + String(rtc.getMinutes()));
  }
  if (int(rtc.getSeconds() < 10)) {
    curSeconds = ("0" + String(rtc.getSeconds()));
  }
  else if ((int(rtc.getSeconds() >= 10)) and (int(rtc.getMinutes() >= 10))) {
    curMinutes = String(rtc.getMinutes());
    curSeconds = String(rtc.getSeconds());
  }
  curTime = "Time: " + curHours + ':' + curMinutes + ':' + curSeconds + ToD;
  //Serial.println(curTime);
}

//Function to upload the user's selection to the web hosted CSV file:
void upload() {
  //code to upload content to webhost
  // print the SSID of the network you're attached to:
  Serial.print("SSID: ");
  Serial.println(WiFi.SSID());

  // print your WiFi shield's IP address:
  IPAddress ip = WiFi.localIP();
  Serial.print("IP Address: ");
  Serial.println(ip);

  //Upload current item to host:
  Serial.println("Uploading..." + entryName);
  String contentType = "application/x-www-form-urlencoded";
  String putData = ("Tim," + entryName + "," + curTime + "," + entryClass);
  Serial.println(putData);
  uploading = 1;
  screen();
  client.put("/test.csv", contentType, putData);

  // read the status code and body of the response
  int statusCode = client.responseStatusCode();
  String response = client.responseBody();

  Serial.print("Status code: ");
  Serial.println(statusCode);
  Serial.print("Response: ");
  Serial.println(response);
  if (statusCode == 201 or statusCode == 204)  {
    uploading = 2; // success!
    screen();
    delay(5000);
  }
  else {
    uploading = 3; //Failure message
    screen();
    wifiConnect(); //Reconnect to wifi if upload failed?
    delay(4000);
  }
  uploading = 0;
  screenStatus = "running";
  screen();
}

Python Code (for server):

#!/usr/bin/python

import csv
import tweepy
import os

def main():
        if os.path.isfile("/var/www/html/public/test.csv"):
                readCSV()
                writeTweet()
        else :
                print("No File to process...")

def readCSV():
        global tweet
        with open('/var/www/html/public/test.csv') as csvfile:
                tweetyBird = csv.reader(csvfile, delimiter=',')
                for row in tweetyBird:
                        if (str(f"\t{row[3]}").strip()) == "Food":
                                tweet = str(f"\t{row[0]} just had a refreshing {row[1]}, at {row[2]}")
                                print(tweet)
                        elif str(f"\t{row[3]}").strip() == "Activity":
                                tweet = str(f"\t{row[0]} just {row[1]}, at {row[2]}")
                                print(tweet)
                        else :
                                tweet = str(f"\t{row[0]} just did something, called {row[1]}, at {row[2]}")
                                print(str(f"\t{row[3]}"))
                                print(tweet)
                os.remove("/var/www/html/public/test.csv")

def writeTweet():
        global tweet
        twitter_auth_keys = {
                "consumer_key"        : "REDACTED",
                "consumer_secret"     : "REDACTED",
                "access_token"        : "REDACTED",
                "access_token_secret" : "REDACTED"
        }

        auth = tweepy.OAuthHandler(
                twitter_auth_keys['consumer_key'],
                twitter_auth_keys['consumer_secret']
        )
        auth.set_access_token(
                twitter_auth_keys['access_token'],
                twitter_auth_keys['access_token_secret']
        )
        api = tweepy.API(auth)

        status = api.update_status(status=tweet)

if __name__ == "__writeTweet__":
        writeTweet()
main()

Cyborg Augmentations v0.2

Electronics work is nearly complete for the wrist mounted life tracker. It’s achieved 100% functionality, and honestly much quicker than expected.

It was fast enough that I plan to expand functionality beyond initial goals.. Just not sure exactly WHAT to expand it’s capabilities to yet..

Right now functionality of the device includes:

  • Properly connecting to a given WiFi network.
  • Pulling down and displaying NTP converted to my local timezone.
  • Displaying formatted time to user via OLED display.
  • Presenting user with options of food/activities they want to log, able to be jogged/scrolled through with a rotary encoder.
  • Ability to upload log entry to webserver. Initiated by pressing the button/stem of the encoder.
  • Processing of log entry and transfer to “permenant” cloud storage.
  • Operates as intended via 3.7v battery power.

Without expanding functionality, there’s still a good deal of work to get the device ready for actual use. Primarily, I’ve drafted a new version of the 3D printable housing, it’s the same width but twice as long as v0.1, it also features strap cut outs which should allow for simple straps (velcro?) to hold the device in place on your arm.

The biggest hold-up for printing at the moment seems to be an exposure setting which is causing surfaces which require supports to become messy and uneven.

I’ll need to run off some print quality tests to see if I can dial in my exposure times and get better dimensional accuracy..

More to come…

The Wagon has Long Since Passed…

Ok, confession time. My family home burned down back at the end of June and I am just getting back up to speed now.. Sure, I’ve done some pretty sweet shit in the meantime, started a couple of new hobbies, etc.. Will probably post some more details about that later, but there’s also been alot of “wallowing” and “self-pity” and other things that are just uncharacteristic of me..

One of the very worst results of being suddenly out of house and home has been the impact on my diet/fitness. Now, 100% this falls into the ‘excuses’ category, since the very simple rules I was following before disaster struck could be followed by a goose in a top-hat if they tried.. But I let it derail me completely. I haven’t counted a calorie or tracked a macro since the fire. And trust me…. There’s been ALOT of calories since then.

So yeah, I’m off the wagon, wanna fight about it? I’m working myself back up to getting back on board. Will keep you all posted.

Cyborg Augmentations v0.1

Inspiration has struck and work is underway. I’ve got my printer churning and electronics enroute. So hop in suckerz, we’re going Bionic!

That’s the first prototype version of a wrist mounted human augmentation.. Name currently in development, along with the rest of the project (I mean, we are only at v0.1, give me a break..). This is only the second model I’ve ever made in Blender. So understandably… It’s not great. But the first model printed off my photon fine, so hopefully this does too. I did have to use the auto-fix tools in lychee to patch up some holes and make the model manifold prior to printing.. But that process seemed to work well and it’s printing as we speak.

The general idea is that this structure will safely and comfortably house a set of electronics to assist it’s host user with logging daily activities on the web. I don’t want to get into too much detail yet, but I’ll keep the site posted as is appropriate.

The driving force for this project is one of my favorite youtube/twitch personalities, VoidstarLab/Zack Freedman:

https://www.youtube.com/c/ZackFreedman/videos

Togeather with the 3D printing site Thangs (https://thangs.com) He’s holding a contest for 3d printed wearables and really kicked my butt in gear with the contest ending in just a couple weeks. Here’s the contest rules if you are interested:

https://blog.thangs.com/hallowearables-design-contest-with-zack-freedman-7327d802de85

Anyways, there’s plenty more to follow as we try to get this wearable off the ground, so check back soon!

Feasting on the Flesh of a Black Cow: Diet Detour #2

Saturdays remain “cheat” days in our household. My chance to set aside my normal low-calorie high-protein diet and strap on the feed bag for whatever I want on my plate. Today, it was a burger.

Not just any burger though, we took the opportunity to try another local establishment that’s new to our family, Black Cow Burger Bar in Turners Ma.

Having never been before, and riding high on the value of a giftcard, we pretty much went all out. Our family of four each ordered our own burgers, then decimated their sides and appetizer menu by picking up the following: Fried Macaroni and Cheese, Fried Pickles, Chicken Tenders, Cajun Fries, Sweet potato Fries, Pastrami toast, and Rueben Egg rolls… It was alot of food. We also each snagged a milkshake to wash it down (except the GF) and mine was even a boozy adult affair.

For a burger I opted for the “Ghosted Maple” burger, sans onions: Angus burger with ghost maple aioli, breaded cheese curds, bacon & caramelized onion.

I promise, the pic doesn’t do the flavor justice…

Bearing in mind this is still in the midst of the CoVID 19 pandemic, we were forced to takeout this feast and eat it in the comfort of our own home, rather than experience the restaurant itself. This seemed to phase the flavor of their burger very little.. It was simply fantastic. The subtle spiciness balanced with the sweetness of the maple, the crispiness of the fried cheese curds (proving the uselessness of the absent onions).. All mouthwateringly good.

My favorite burger on earth has long been the “Westhampton Burger” from Local Burger in Keene, NH. Yes, I know they started out in Northampton, Keene does it better, fight me. However this Black Cow burger, which had to survive a car trip in polystyrene and was thus enjoyed at a less than optimal temperature and texture still managed to give the westhampton a fight for the crown. Had I the opportunity to have eaten this onsite at the Black Cow establishment… The burger monarchy may while have been usurped this day.

Now, all that taste comes with a price tag. Literally, a $15 price tag. It’s worth noting that the westhampton burger blows Black cow away in this regard, coming in at a comparatively cheap $8.49… And it still stands as my personal best burger award winner.

As far as the appetizers and sides are concerned…

[photo from 2021 no longer available]
There’s alot going on, and all of it slaps…

My pick of the liter is the Rueben Eggrolls, hands down. Shamefully these appear to be a limited time offering on the menu. However, that’s not to say their perennial snacks are nothing to shake a stick at either. The cajun fries and sweet potato fries both make a perfect compliment to shove down your gullet with a burger (I’d lean Cajun myself, but admittedly their sweet potato fries are the best I’ve ever had). The pastrami toast is an interesting execution.. One which sadly gets blown away by the Ruben Eggroll, which hits many of the same notes but harder. The chicken tenders, while good, suffered the most from their trip home.. Not entirely soggy but no longer crisp enough for me to be objective in their assessment.

Finally, the fried macaroni and cheese… It was serviceable. What I mean by that is it was great, one of the best macaroni and cheese “bites” I’ve had in this form, but my scale on those has long been broken by the stellar mac and cheese bites from Local Burger.. They are perfect and despite my best efforts I just can’t appreciate fried Mac and Cheese from anywhere else the same way anymore. The GF did get this fried Mac in disk form on her burger and for what it’s worth she was a really big fan of it (but also agreed Local Burger’s are objectively better).

What I absolutely can appreciate is the downright AMAZING barbecue sauce this place has come up with. If they are getting this off the shelf somewhere I need to know what shelf, but I highly doubt that’s the case. They opt for a more tangy/savory version of the condiment compared to the saccharine sauces that are so pervasive these days. It is a welcome departure from this new BBQ “norm”. This sauce was bundled with the mac and cheese bites as well as the chicken tenders and boosted both of those, otherwise relatively low notes, well above baseline.

And OMG the shake.. I can’t believe I got this far and haven’t mentioned the shake! I picked the Peanut Butter Bourbon shake and it was hands-down the best decision I’ve ever made in my life. Whoever is mixing these things knows their shit. The bourbon flavors come through heavy at first sip and somehow, without a hint of alcohol, fade perfectly into the peanut butter background that caresses your palate on the way down. That alcohol, well hidden as it is, is certainly still present though. Granted, I’m not the biggest drinker and my consumption has only tapered off further on my diet, but this shake did hit me and the feeling stuck around. I’m including a picture from their facebook page of what COULD be this shake, based on the description, because my own pictures of a to-go cup wouldn’t do this masterpiece justice:

[image no longer available]
Maybe this is what it would look like if you ate onsite? Trust me, just buy it.

Overall our family’s impression of Black Cow is very positive. It’s pricey, but that added cost actually seems to be accounted for in the taste. It directly competes with a long-standing favorite restaurant of mine and held it’s own despite it’s CoVID handicap.. 9/10, I’m reserving the 10 for after we can try their grub onsite.

TMNT – Collection Complete!

Just got in the last Back-issue I was looking for, the collection is now complete. It’s a decent eastman cover, issue 39 B.

There’s a few of the side-series I still need to pickup, and one annual. But this means that I’m now 100% up to date with the current IDW run. Chapter of my life CLOSED.

Sent a Batch to CGC!!

I’ve been collecting comics for quite awhile, I’ve picked up some graded books in the past from ebay, etc. But today marks the first time I’ve ever bundled them up and mailed them into CGC for grading myself… It’s terrifying/intimidating/exciting to say the least!

I sent in a pretty wide selection of stuff, all modern age…

Tack onto that list Swamp Thing #37, which I sent in for a crossover regrade, and the issue of Soldier of Fortune magazine from my birth month/year.

Can’t wait to see what I get for grades but mostly I want to see the tracking info update to say they’ve been received safely!

Edit: Adding a note for my own conveinence, the Swampthing I sent in was a PGX graded 8.0. The Hellblazer #1 I sent was a cgc graded 9.0 (with a broken capsule).

Published
Categorized as Comics

Teenage Mutant Ninja Turtles: Shredder’s Revenge (Trailer)

News today in the turtle realm, there’s a new “16-bit”-esque beat’em up coming out for PC and Consoles.

The trailer went for an interesting angle, remixing the ’87 turtles cartoon theme and laying it over all new animation and a tone that’s closer to the ’03 turtles.. I can dig it, but time will tell if they do our tmnt justice with the gameplay.

The trailer isn’t clear if this is just a straight-up remake of turtles in time with a new splash of paint or if it’s an all new title. I’m onboard for either but would enjoy a new take over a remaster. It’s not like it’s difficult to fire up turtles in time or hyperstone heist for those of us who really still want to play the 16-bit classics.. So I’m hoping they opt to build on the foundation of those games instead.

I’m keeping a close eye on this.

IDW TMNT Adds – 3/9/21

Another good batch came in today, two Eastman covers on 56 & 75 and the “What-if” of IDW: Deviations. What-if is basically my favorite comic book series of all time, mix in the TMNT and I’m there every time.